MM-TS-3

SEPARATED SHARED USE PATH TYPICAL SECTIONS
MM-TS-3

(Click image to open PDF)

Latest Revision Note

01/28/2022    ADDED VEHICULAR BRIDGE TYPICAL SECTION WHEN SIDEWALK PRESENT DRAWING. GENERAL NOTE (P) WAS ADDED. REVISED BRIDGE TYPICAL SECTION TITLES.

Related Standard Drawings

DRAWING DESCRIPTION REMARKS
MM-BPR-1 BIKE AND PEDESTRIAN SAFETY RAIL FOR PEDESTRIAN RAIL REQUIREMENTS
MM-BPR-2 BIKE AND PEDESTRIAN MEDIAN BARRIER RAIL FOR BIKE AND PEDESTRIAN MEDIAN BARRIER RAIL
MM-BPR-3 BARRIER SLOPED END TREATMENT FOR SAFETY RAIL DETAILS
MM-CR-SERIES CURB RAMP SECTION FOR CURB RAMP DETAILS
MM-PM-1 SIGNING AND PAVEMENT MARKINGS AT INTERSECTION CROSSINGS FOR SHARED-USE PATHS
FOR BIKE LANE/ROUTE PAVEMENT MARKINGS
MM-PM-2 SIGNING AND PAVEMENT MARKINGS FOR BICYCLE LANE OR ROUTES FOR BIKE LANE/ROUTE PAVEMENT MARKINGS
MM-PM-3 SIGNING AND PAVEMENT MARKINGS FOR BICYCLE LANES ON URBAN ROADWAYS FOR BIKE LANE/ROUTE PAVEMENT MARKINGS
MM-PM-4 SIGNING AND PAVEMENT MARKINGS FOR BICYCLE LANES FOR BIKE LANE/ROUTE PAVEMENT MARKINGS
MM-PM-5 SIGNING AND PAVEMENT MARKINGS FOR BICYCLE LANES AT INTERSECTIONS FOR BIKE LANE/ROUTE PAVEMENT MARKINGS
MM-PM-SERIES PAVEMENT MARKING SECTION FOR BIKE LANE/ROUTE PAVEMENT MARKINGS
MM-SW-2 ALTERNATE DETAILS FOR CONCRETE SIDEWALK (REHABILITATION)
FOR ALTERNATE DETAILS FOR CONCRETE CURBS AND GUTTERS
MM-TS-1 BIKE ACCOMMODATION DESIGN GUIDANCE FOR BIKE ACCOMMODATION DESIGN GUIDANCE
MM-TS-2 LATERAL OFFSETS FOR SIDEWALK AND SHARED USE PATH FOR PEDESTRIAN FACILITY LATERAL OFFSETS
RP-D-15 DETAILS OF STANDARD CONCRETE DRIVEWAYS FOR CONCRETE DRIVEWAYS
RP-D-16 DETAILS OF LOWERED STANDARD CONCRETE DRIVEWAYS FOR CONCRETE DRIVEWAYS
RP-SC-1 6" SLOPING CONCRETE CURBS AND CONCRETE CURBS AND GUTTERS FOR 6" SLOPING CONCRETE CURBS AND CONCRETE CURBS AND GUTTERS
RP-VC-10 VERTICAL CONCRETE CURBS AND CONCRETE CURBS AND GUTTERS FOR VERTICAL CONCRETE CURB AND CONCRETE CURBS AND GUTTER DETAILS
RP-VC-11 VERTICAL CONCRETE CURBS AND GUTTERS 6" AND 7' DEPTH FOR VERTICAL CONCRETE CURB AND CONCRETE CURBS AND GUTTER DETAILS
S-PL-6 SAFETY PLAN SAFETY HARDWARE PLACEMENT ON OUTSIDE EDGE FOR GUARDRAIL PLACEMENT
STD-11-1 BRIDGE RAILING W/ STRUCTURAL TUBING SEE DETAILS
STD-11-2 STANDARD CONCRETE CLASSIC RAIL SEE DETAILS
T-M-4 STANDARD INTERSECTION PAVEMENT MARKINGS FOR CROSS WALK MARKING

Related Item Numbers

ITEM NO. U/M DESCRIPTION
303-01 TON MINERAL AGGREGATE, TYPE A BASE, GRADING D
307-01.08 TON ASPHALT CONCRETE MIX (PG64-22) (BPMB-HM) GRADING B-M2
402-01 TON BITUMINOUS MATERIAL FOR PRIME COAT (PC)
402-02 TON AGGREGATE FOR COVER MATERIAL (PC)
403-01 TON BITUMINOUS MATERIAL FOR TACK COAT (TC)
411-01.07 TON ACS MIX (PG64-22) GRADING E SHOULDER

Archived Standard Drawings

DATES OF EACH ARCHIVED DRAWINGS ( THE INITIAL STANDARD DRAWING IS BOLD )
01-07-2019 | 06-28-2019 | 06-15-2021 | 01-28-2022

If you find any mistakes, missing information or have a question, contact:
TDOT CADD Support
1200 James K. Polk Building
Nashville, TN 37243-1402
TDOT.CADDSupport@tn.gov

This Page Last Updated: July 12, 2024 at 11:37 AM