T-M-17

PAVEMENT MARKING DETAILS FOR ROUNDABOUTS
T-M-17

(Click image to open PDF)

Latest Revision Note

05/04/2022    REDREW THE TYPICAL PAVEMENT MARKING DRAWING AND ADDED GENERAL NOTES (B), (C) AND (D).

Related Standard Drawings

DRAWING DESCRIPTION REMARKS
MM-PM-5 BICYCLE LANE LINE ON DEPARTURE DOTTED THROUGH TAPER AND SOLID WHEN FULL WIDTH IS AVAILABLE SIGNING AND PAVEMENT MARKINGS FOR BICYCLE LANES AT INTERSECTIONS
RD18-RSD-1 SIGHT DISTANCE FOR URBAN AND RURAL ROUNDABOUTS FOR SIGHT DISTANCE FOR SINGLE-LANE AND MULTI LANE ROUNDABOUTS
RD18-RTS-1 DESIGN STANDARDS FOR SINGLE LANE URBAN AND RURAL ROUNDABOUTS FOR DESIGN STANDARDS FOR SINGLE-LANE ROUNDABOUTS
RD18-RTS-2 DESIGN STANDARDS FOR MULTI-LANE URBAN AND RURAL ROUNDABOUTS FOR DESIGN STANDARDS FOR MULTILANE ROUNDABOUTS
RD18-RTS-3 STANDARD CONSTRUCTION DETAILS FOR ROUNDABOUTS FOR STANDARDS CONSTRUCTION DETAILS FOR ROUNDABOUTS
T-M-4 STANDARD INTERSECTION PAVEMENT MARKINGS FOR STANDARD INTERSECTION PAVEMENT MARKINGS
T-M-4A STANDARD UNSIGNALIZED MID-BLOCK CROSSING FOR STANDARD INTERSECTION PAVEMENT MARKINGS

Related Item Numbers

ITEM NO. U/M DESCRIPTION REMARKS
       
       
       

Archived Standard Drawings

DATES OF EACH ARCHIVED DRAWINGS ( THE INITIAL STANDARD DRAWING IS BOLD )
07-02-2012 | 02-20-2014 | 06-28-2019 | 05-04-2022
If you find any mistakes, missing information or have a question, contact:
TDOT CADD Support
1200 James K. Polk Building
Nashville, TN 37243-1402
TDOT.CADDSupport@tn.gov

This Page Last Updated: July 12, 2024 at 11:37 AM