RD11-TS-7A

DESIGN STANDARDS 2-LANE CURB & GUTTER WITH CONTINUOUS 2-WAY LEFT-TURN LANE WITH GRASS STRIPS
RD11-TS-7A

(Click image to open PDF)

Related Standard Drawings

DRAWING DESCRIPTION REMARKS
MM-TS-1 BIKE ACCOMMODATION DESIGN GUIDANCE FOR BIKE ACCOMMODATION DESIGN GUIDANCE
MM-TS-2 LATERAL OFFSETS FOR SIDEWALK AND SHARED USE PATH FOR LATERAL OFFSETS FOR SIDEWALK AND SHARED USE PATH
MM-SW-1 DETAILS FOR CONCRETE SIDEWALKS FOR DETAILS FOR CONCRETE SIDEWALK
RD11-TS-1 DESIGN STANDARDS FOR LOW-VOLUME ROADS TYPICAL SECTION DESIGN FOR VOLUMES LESS THAN 5,000 VEHICLES PER DAY USES THE DESIGN STANDARDS SHOWN
RD11-TS-2 SUPERELEVATION TRANSITION DETAILS FOR UNDIVIDED ROADWAY TYPICAL SECTION DESIGN FOR VOLUMES LESS THAN 5,000 VEHICLES PER DAY USES THE DESIGN STANDARDS SHOWN
RD11-TS-3 DESIGN STANDARD FOR ARTERIAL HIGHWAYS (2-LANE) TYPICAL SECTION DESIGN FOR VOLUMES LESS THAN 5,000 VEHICLES PER DAY USES THE DESIGN STANDARDS SHOWN
RD11-TS-SERIES RD11 TYPICAL SECTION AND DESIGN CRITERIA FOR TYPICAL SECTION REQUIREMENTS
RP-SC-1 6" SLOPING CONCRETE CURBS AND CONCRETE CURBS AND GUTTERS FOR DESIGN SPEEDS BETWEEN 45 AND 55 MILES PER HOUR SLOPING CURBS ARE USED IN PLACE OF VERTICAL CURBS.
S-PL-6 SAFETY PLAN SAFETY HARDWARE PLACEMENT ON OUTSIDE EDGE FOR TYPICAL GUARDRAIL PLACEMENT
S-PL-6A SAFETY PLAN SAFETY HARDWARE PLACEMENT IN MEDIAN FOR TYPICAL GUARDRAIL PLACEMENT  
T-M-1 DETAILS OF PAVEMENT MARKINGS FOR CONVENTIONAL ROADS AND MARKING ABBREVIATIONS SEE STRIPING DETAILS

Related Item Numbers

ITEM NO. U/M DESCRIPTION REMARKS
       
       
       

Archived Standard Drawings

DATES OF EACH ARCHIVED DRAWINGS ( THE INITIAL STANDARD DRAWING IS BOLD )
01-01-2019 | 07-17-2020

If you find any mistakes, missing information or have a question, contact:
TDOT CADD Support
1200 James K. Polk Building
Nashville, TN 37243-1402
TDOT.CADDSupport@tn.gov

This Page Last Updated: September 11, 2020 at 11:27 AM